Introduction and characteristics of passion fruit Juicer
Time：2021-04-13 07:48 Browse：277
1、 Characteristics of stainless steel passion fruit Juicer
This machine is suitable for squeezing juice of tomato, pineapple, apple, orange and other vegetables.
Screw push kneading;
The improved screw and slag part are suitable for pressing high fiber materials such as leafy vegetables;
Automatic finish berry, nuts and other fruits and vegetables juicing, slag removal process;
It is made of excellent stainless steel.
2、 Introduction of operation process of stainless steel passion fruit Juicer
The passion fruit material participates in the feeding hopper and is pressed under the push of the screw. The squeezed juice flows into the juice container at the bottom through the filter screen, while the waste material is discharged through the annular vacancy formed between the screw and the conical part of the pressure regulating head. The size of the vacancy can be adjusted by moving the pressure regulating head along the axial direction. It is used clockwise (from the slag chute to the hopper end of the equipment, when turning the bearing seat of the hand wheel shaft, the pressure regulator head will turn to the left, and the vacancy will decrease, otherwise, the vacancy will increase.) Change the size of the vacancy, that is, adjust the resistance of slag discharge. The slag rate can be changed, but assuming that the vacancy is too small, under great pressure kneading, local slag particles and juice will be extruded together through the filter screen. Of course, the juice output increases, but the quality of juice decreases relatively. The size of the vacancy should depend on the specific process requirements of users.
The slag rate can be changed, but assuming that the vacancy is too small, under great pressure kneading, local slag particles and juice will be extruded together through the filter screen. Of course, the juice output increases, but the quality of juice decreases relatively. The size of the vacancy should depend on the specific process requirements of users.
